5.9. Evaporator of the air conditioning system
Evaporator casing arrangement
1. Block of the delivery fan
2. Amplifier of the air conditioner (4-cylinder engines)
3. Adjusting valve
4. Amplifier of the air conditioner (6-cylinder models)
5. Electric motor of the delivery fan
6. Resistor of the negnetatelny fan
7. Thermoresistor
8. Heater radiator
|
9. Evaporator
10. Airoutlet gate servo-driver
11. Control panel of the air conditioner
– conditioner switch
– gearshift of the delivery fan
– switch of the modes
12. Block of the air conditioner |
The casing of the evaporator is located under the central part of the dashboard, near the delivery fan.
Removal
| PERFORMANCE ORDER |
| 1. Lower pressure in system. |
| 2. Disconnect a wire of the minus plug of the accumulator. |
|
3. Disconnect two tubes of coolant (are specified by shooters) from a partition. |
|
4. In models of 1999 for a detachment of tubes of coolant, the special tool is used.
1. Press from above.
2. Turn a rychazhok.
3. Pull up. |
| 5. Merge cooling liquid and disconnect hoses from the heater block. |
| 6. Remove finishing of the control panel and the control panel. |
| 7. Disconnect wires from the evaporator and a casing of the delivery fan. |
|
8. Remove the block of sockets of electric wires located in the lower part of the delivery fan. Remove clamps and an air pipe. Unscrew assembly bolts of a casing of the delivery fan (are specified by shooters). Remove the block of the delivery fan. |
|
9. Unscrew the bolts fixing the broad valve to the evaporator.
|
|
10. Remove evaporator clamps, disconnect a drain hose and remove an evaporator casing.
|
| 11. Remove the thermostat sensor, unscrew screws and get the evaporator from a casing. |
|
Installation
Installation is carried out upside-down removals.
