e4035ede

4.7. Sensor of temperature of cooling liquid

Check

PERFORMANCE ORDER
1. If the sensor of temperature of cooling liquid does not work, check its safety lock.
2. If the indicator of the sensor shows that the engine hot when you only started the cold engine, disconnect a wire from the sensor (it is specified by an arrow). If indications of the indicator decrease, replace the sensor. If indications remain the same, so conducting of the indicator is punched, or the indicator is faulty. In the drawing at the left – the 4-cylinder engine, on the right – 6-cylinder.
3. If the indicator does not show anything after the engine got warm and safety locks of the indicator are whole, kill the engine, disconnect a wire from the sensor and by means of a crossing point connect a wire to grounding of the engine. Without starting the engine, for a moment, include ignition. If the indicator shows that the engine is warmed, replace the sensor.

Replacement

PERFORMANCE ORDER
1. Merge cooling liquid.
2. Disconnect a wire from the sensor.
3. Unscrew the faulty sensor and twist new. Connect a wire and check operation of the sensor.