Toyota Camry XV20 - the Repair manual and operation

8.3.4. Release bearing and fork

Removal

PERFORMANCE ORDER

1. Disconnect the battery from weight. 2. Remove transmission. 3. Remove a spring, get a coupling switching off fork, get the release bearing from a fork.

Check

PERFORMANCE ORDER

Holding an external holder check freedom of rotation of the bearing. The bearing has to rotate freely in a holder. Otherwise replace the bearing. It is forbidden to wash out the bearing in solvent.

Installation

PERFORMANCE ORDER

1. Grease an internal flute of the bearing, a vent of a main shaft and the holder of the forward bearing of a main shaft of the check point with refractory lubricant. 2. Grease with refractory lubricant dredging under a spherical support. 3. Grease with refractory lubricant of the place of fastening of the bearing and dredging under a pusher of the working cylinder. Establish a spring bracket. 4. Install the bearing on a fork. 5. Dress the bearing on a main shaft of the check point. Pass a fork through a cover and dress a fork on a support, having pressured her before click. 6. Slightly grease with refractory lubricant the surface of the bearing adjoining to a diaphragm spring. 7. Further assembly is carried out upside-down.