3.1.16. Fastenings of the engine
Typical fastenings of the 4-cylinder engine
|
1. The draft regulating engine shift
2. Back support of the engine
3. Mechanical transmission
4. Automatic transmission
|
5. Fastening of a collector
6. Forward support of the engine
7. Engine arm |
Check
| PERFORMANCE ORDER |
| 1. Lift and fix a forward part of the car. Establish a jack under the oil pallet. |
| 2. Examine rubber shock-absorbers of support on existence of wear and damages, if necessary replace them. |
| 3. Check that bolts of support were strong tightened. |
| 4. Check whether support are worn-out. |
|
Replacement
| PERFORMANCE ORDER |
| 1. Disconnect a wire of the minus plug of the accumulator. Lift and fix a forward part of the car. |
| 2. To remove the right support, twist a nut and get a through bolt. |
| 3. Twist the nuts fixing a support to an arm and remove a support. |
| 4. To remove a back support, get three rubber stoppers and twist support nuts. |
| 5. To remove a forward support, twist the nut fixing it to an engine arm, and unscrew three bolts fixing a support to a body. |
| 6. Installation is made upside-down. |
|
