9.2.2. Steering wheel
Prevention
The considered cars are equipped with a safety cushion (SRS system). When working near details of a safety cushion switch-off the battery in order to avoid operation of system and injuries.
Removal
| PERFORMANCE ORDER |
| 1. Transfer the ignition key to position of OFF and disconnect the battery from weight. Remove the positive plug of the battery and wait not less than 2 min. |
|
2. Turn a wheel and establish wheels in the provision of driving on a straight line, hook the screw-driver and remove caps of screws on both parties of a wheel. Release two screws of fastening of the module of a safety cushion (1 – the screw with cross shliyets, 2 – the screw case). Release screws until dredging on a screw head does not come into a screw case opening. |
|
3. Remove the safety module. |
| |
4. Press a socket clamp
|
|
5. Disconnect the socket. |
|
6. Disconnect sockets of a sound signal and system a cruise control. |
| 7. Turn off a nut of fastening of a wheel and designate the provision of a wheel concerning a shaft (are applied on parts of cars of a tag of orientation of a wheel with the manufacturer). |
|
8. Vypressuyte steering wheel. Remove a wheel a stripper. It is forbidden to remove a wheel blows to a nave. |
|
Installation
| PERFORMANCE ORDER |
|
1. Make sure that wheels are established in the provision of driving on a straight line. Turn a spiral wire counterclockwise to feeling of hard rotation. Turn a wire clockwise on three turns and combine two indexes of red color. At the correct installation the spiral has to turn in both parties on three turns. |
| 2. Combine tags of a wheel and a shaft, establish a wheel and tighten a nut with the set moment. |
| 3. Attach sockets a cruise control and a sound signal. |
| 4. Attach the safety module socket. |
| 5. Install the module of safety and tighten screws with the set moment. |
| 6. Attach to the wire battery. |
|
