Toyota:: Camry XV20:: Fuel highway and injectors

6.15. Fuel highway and injectors

Removal

PERFORMANCE ORDER

1. Disconnect a wire of the minus plug of the accumulator.
2. Pit pressure in fuel system.

3. In six-cylinder engines unscrew two bolts (are specified by shooters in the drawing at the left) and shift the block of the operating coils of the vacuum valve aside.
4. Disconnect wires from injectors.
	5. Disconnect tubes of supply of fuel from the fuel highway.

6. Unscrew bolts of the fuel highway (are specified by shooters). In the drawing at the left – 4-cylinder engines, on the right – 6-cylinder.
	7. Remove the fuel highway together with injectors.
	8. Remove injectors from nests of the fuel highway.
	9. If you are going to reuse an injector, replace its sealing rings.

Installation

Installation is carried out upside-down removals.