e4035ede

6.8. Sensor of the index of level of fuel

Check
PERFORMANCE ORDER
1. Lower pressure in system. Disconnect a wire of the minus plug of the accumulator.
2. Remove the block of the fuel pump.
3. Disconnect a wire of the sensor and connect an ohmmeter to contacts 2 and 3. Measure the sensor resistance when the lever of the measuring instrument is lowered completely down (the tank is empty) about 110-115 Ohms and when the lever is completely lifted (the tank is full) about 2-3 Ohms. When moving the lever resistance has to change evenly.
4. If necessary replace the sensor.

Replacement

PERFORMANCE ORDER
1. Unscrew screws (are specified by shooters) and press an ear And yes pull the sensor up to remove it.
2. Install the new sensor.