Toyota Camry XV20 - the Repair manual and operation

1.1.10. Electrohatch

Electrohatch

For control of the electrohatch use switches near personal illumination. The key has to is in the provision of "ON".

Moving process

For opening press the switch on the party of "SLIDE OPEN". The electrohatch completely will open. For an electrohatch stop press the switch towards "SLIDE OPEN" or "TILT UP" halfway. The light-protective blenda will open together with the electrohatch.

For closing press the switch on party "TILT UP". As a precautionary measure when closing the electrohatch will stop on three quarters of a way to full closing. Therefore release the switch and press it once again to close the electrohatch completely.

Process of installation of a light-protective blenda

The light-protective blenda can be opened and closed a hand.

Tilting process

For lifting – press the switch on party "TILT UP".

For lowering – press the switch on the party of SLIDE OPEN".

You can stop the electrohatch in any desirable situation. The electrohatch will move at the pressed switch and will stop if you release it.

---

Prevention

If someone's neck, the head or hands get to an aperture during closing of the electrohatch, it can lead to a serious trauma. If someone another closes the electrohatch, be convinced that it becomes safely.

Never leave small children of one in the car, especially at the inserted ignition key. They can press switches of drives of windows and get to a window opening.

---