1.1.26. Audio system
Type 1: L*M*U ETR/radio receiver cassette player
Type 2: L*M*U ETR/radio receiver cassette player
The audio system works when the ignition key is installed in the provision of "ACC" or "ON".
Inclusion and switching off of system
Press the PWR button for inclusion and switching off of the audio system. Press the BAND button, "CD" or "TAPE" for inclusion of this function without pressing of the PWR button.
You can turn on the cassette player by an insert of a cassette tape or a compact disk.
You can turn on the cassette player by pushing out of a cassette tape. If the audio system was switched off earlier, then all audio system will be switched off after pushing out of the cartridge with a tape. If before the radio receiver was switched on, it will turn on again.
Switching between functions
Press the BAND button, "CD" or "TAPE" if the system is already included, but you want to execute switching from one function to another.
Timbre and balance
You watch details about controls of a timbre and balance of the audio system in its description.
Sounding of the audio system generally is defined by mix of levels of the top and lower frequencies. In general different types of musical and speech programs usually sound better at various installations of the top and lower frequencies.
The good balance of the left and right stereophonic channels and forward and back levels also is very important. Remember that when listening stereophonic recording or a broadcast change of the right/left balance will strengthen the loudness of one group of sounds with decrease in loudness of other group.
Radio receiver antenna
For lowering of the antenna switch off the audio system, having pressed the PWR button or having turned the ignition button in the provision of "LOCK".
Cassette player
At a cartridge insert the party with a visible tape has to be turned to the right.