1.1.13. Seat belts
| Make sure that the seat belt was fastened properly. |
Tension devices of forward seat belts of the driver and ahead of the sitting passenger are intended for actuating in response to strong forward collision.
| If the sensor of a pneumopillow detects blow from strong forward collision, forward seat belts are quickly involved back by a natyazhitel so that belts will strongly hold the people sitting on front seats. |
Tension devices of seat belts work even if on a front seat there are no passengers.
| This indicator is highlighted when the ignition key is in the provision of "ON" or "ACC". It will go out approximately in 6 seconds. It means that tension devices of forward seat belts work normally. |
This system of the warning light signals controls sensors of forward pneumopillows, knots of tension devices of seat belts, the warning light indicators, system of an internal electrical wiring and power supplies.
Main components of system of tension devices of seat belts
| 1 – Sensor of forward satellites; 2 – The warning light signal of SRS; 3 – Device of retraction of seat belts; 4 – Device of sensors of pneumopillows. |
The tension device of seat belts is operated via the sensor of pneumopillows. The knot of the sensor of a pneumopillow consists of the sensor of safety and the sensor of a pneumopillow.
If the device of retraction of seat belts is put in action, functional noise can be heard and a small amount of the gas similar to smoke is released. This smoke is harmless and does not mean that there was a fire.
If the device of retraction of seat belts worked, then the natyazhitel of a belt will remain locked.
Prevention