| 1. Disconnect a cable and remove a trunk lid latch (see subsection 11.14.). |
|
2. For access to a cable of a door of a mouth of a tank remove a rug of a luggage carrier and the left sidewall of facing. Turn a cable tip counterclockwise on 1/4 turns and get from an arm (Camry model). |
|
3. On the Avalon models get a cable tip from an arm and bring out of gearing with the locking tank mouth door mechanism. |
| 4. Remove the lower part of a back seat (see subsection 11.27.). On two-door models (coupe) it is necessary to remove a back and the lower part of a seat. |
| 5. Hook and remove an overlay of powder of a door of the driver. On 4-door models remove the lower facing of the central side rack of a body. |
| 6. Raise a floor mat and remove all latches of fastening of a cable to a body. |
|
7. Unscrew two screws of fastening of the handle of a cable to a floor. |
|
8. Raise the case and disconnect covers of cables from brackets and eyes on levers. |
| 9. Attach a piece of a wire of sufficient length to a cable. |
| 10. Stretch a cable from a luggage carrier to a wire exit. |
| 11. Attach a new cable to a wire and stretch a new cable to the lever for a wire. |
| 12. Further installation is carried out upside-down. |
