e4035ede

11:21. Mirrors

EXTERNAL MIRRORS

PERFORMANCE ORDER
1. On cars with the electric drive of a mirror remove facing of a door and the water filter (see subsection 11.16.).
2. Hook and remove facing of a mirror from the inside of a door.
3. Disconnect the electric motor socket.
4. Turn off three bolts of fastening of a mirror. Track the route of conducting and disconnect the mirror electric drive socket at doors. Remove a mirror.
5. Installation is carried out upside-down.

INTERNAL MIRROR

PERFORMANCE ORDER
1. Insert an edge of the screw-driver wound by an adhesive tape into a mirror leg basis groove and push out an U-shaped spring hairpin by which the leg of a mirror keeps in the basis (the screw-driver at the same time has to come approximately on 18 mm).
2. At installation of a mirror insert a spring if it was removed. Insert a mirror into the basis and press.
3. If the plate of fastening of a mirror disappeared from a windshield, then it should be pasted special glue.