11:25. Dashboard
Details of the dashboard and fastening of the panel
|
1. Intensifying section of the dashboard
2. Arm of the N2 dashboard
3. Arm of the N1 dashboard
4. Rack of the N2 dashboard
5. Decorative overlay of a forward rack
6. Side nozzle of an obduv of a windshield
7. Side overlay of a frame of a windshield
8. Overlay of a forward doorway
9. Overlay of powder of a forward door
10. Lower N2 panel
11. Glove box
12. Decorative overlay of a door
glove box
|
13. Facing panel of a guard of devices
14. Lower decorative slip
15. Switch of the alarm system
16. Block of remote control of a rear-view mirror
17. Top casing of a steering column
18. Dashboard
19. Facing of a forward rack of a body
20. Holder
21. Rack of the N1 dashboard |
At the left the panel fastens a chetyrma bolts and screws, in a steering column – five (four are concentrated at the top of space of a steering column), three on floor section and two – in a cavity of a glove box.
| PERFORMANCE ORDER |
| 1. Disconnect the plug of a negative pole from the battery, and then remove the plug of a positive pole. |
| 2. Remove decorative panels of devices and the central floor section (see subsection 11.23. and subsection 11.22.). |
| 3. Remove a guard of devices (see subsection 12.1.12.) and glove box. |
| 4. It is necessary to disconnect and shoot the safety cushion module from the passenger with parts of cars (see subsection 12.1.26.). |
| 5. From the central part of the dashboard remove audio-block (see subsection 12.1.14). |
| 6. Remove the control panel of conditioning (see subsection 5.2.). |
|
|
7. Remove the knee buffer and an intensifying plate. Turn off bolts of fastening of a steering column and lower a column. |
|
|
| 8. Disconnect sockets of conducting of the dashboard. Reciprocal parts of the majority of sockets of the panel not interchangeable they cannot be mixed, however at the slightest doubt designate sockets under the dashboard before their rassoyedineniye at the left and on the right. |
| 9. Remove all elements of fastening of the dashboard (bolts, nuts, screws). Raise and remove the panel through a doorway from the driver (the last procedure is performed together). |
| 10. Installation is carried out upside-down. |
|
