e4035ede

2.5. Check of a condition of tires and pressure in tires


 For check of depth of a protector it is possible to use the simple measuring device. If depth of a protector decreased below minimum admissible, tires need to be replaced.


Check a condition of the drawing of a protector and degree of its wear. Uneven wear of tires demonstrates bad balancing of wheels or bad adjustment of a suspension bracket.

Various forms of wear of the drawing of a protector and possible reasons

1. Weak pressure in tires
2. Wrong convergence
wheels or too big disorder of wheels
3. Uneven wear
Possible reasons:
Weak pressure in tires, bad balancing or deformation of a wheel;
Steering drafts or steering bipod are worn-out;
Elements of a forward suspension bracket are worn-out or damaged.
4. Too high pressure in tires
5. Wrong adjustment of a suspension bracket

Examine tires on existence of cuts, punctures, the got stuck nails or other sharp objects. If there is an air leak, first of all, check reliability of the valve of the camera.

If it as it should be, check the surface of the tire for existence of punctures, having applied soap water on the surface of the tire. Leak of air will prove to be in the form of bubbles.

Regularly check pressure in tires by means of the exact sensor.