2.8. Replacement of engine oil and oil filter
Before work prepare necessary tools and materials.
Tools necessary for replacement of an oil filter
|
|
1. Pallet
2. Rubber gloves
3. Wrench handle
4. Nozzle
5. A special key for untwisting of an oil filter
6. A nozzle for untwisting of an oil filter |
| PERFORMANCE ORDER |
| 1. Warm up the engine. Remove a cap of a jellied mouth of oil. |
| 2. Lift the car and install it on support. |
|
3. Install the pallet under a drain opening of the oil pallet and turn off a cap by means of a cap wrench. Wait until oil flows down. Wipe a cap and establish it into place. |
|
4. Install the pallet under an oil filter and unscrew the filter, rotating it counterclockwise a special key. |
| 5. Wipe the block of cylinders and an opening for installation of the filter. |
|
6. Oil rubber laying of the new filter engine and twirl the filter into place. Twist the filter a hand until laying of the filter concerns the block of cylinders. Then turn the filter in addition on 3/4 turns. |
| 7. Fill in new engine oil through a jellied mouth. Wait until oil flows down in the pallet. Start the engine and check whether there is no leak. Check oil level. If necessary add oil. |
|
