e4035ede

3.2.11. Heads of cylinders

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Merge cooling liquid.
3. Remove the top and lower sections of an inlet collector.
4. Remove final collectors.
5. Take off a gas-distributing belt, asterisks of camshafts and the top intermediate pulley.
6. Unscrew bolts of a back cover of a gas-distributing belt.
7. Pick up the phone of cooling liquid.
8. Remove camshafts.
9. Unscrew bolts and disconnect plaits of wires from back parts of heads.

10. Unscrew the drowned bolts of heads.

11. Weaken other bolts of heads in the sequence, the return sequence of their tightening shown in the drawing. Weaken bolts on a quarter of a turn at one time.
12. Remove heads.

Installation

PERFORMANCE ORDER
1. Carefully clean and wipe with acetone the joined surfaces of heads and the block of cylinders. If surfaces are scratched or damaged otherwise, then they need to be processed in a specialized workshop.
2. By means of a suitable tap clean carvings in the block of cylinders. By means of a suitable die clean bolts of heads of cylinders.
3. Establish new laying and establish one of heads.
4. Oil bolts pure engine.
5. Insert bolts and tighten them till the required moment of an inhaling of the first step in the specified sequence. Do not tighten the drowned bolt.
6. Hold on bolts for 90 ° and tighten the drowned bolt.
7. Similarly establish other head.
8. Establish the remained details.