Toyota:: Camry XV20:: Covers of heads of cylinders

3.2.4. Covers of heads of cylinders

Removal

PERFORMANCE ORDER

1. Disconnect a wire of the minus plug of the accumulator.
	2. Uncover the engine.
	3. Disconnect wires of coils of ignition, remove coils and spark plugs.
	4. Twist two nuts and disconnect plaits of wires from the left part of the engine.
	5. Disconnect a plait of wires from a cover of a gas-distributing belt, unscrew five bolts and disconnect wires from the right part of the engine.
	6. Twist nuts and uncover heads.

Installation

PERFORMANCE ORDER

1. Carefully clean and wipe with acetone the joined surfaces of covers and heads of cylinders.
2. Establish new laying of tubes of spark plugs.
	3. Establish new laying in covers of heads, apply sealant on the areas specified by shooters and establish covers.
4. Tighten nuts till the required moment of an inhaling and establish the remained details.