| 1. Disconnect a wire of the minus plug of the accumulator.
|
| 2. Oil bolts of collectors impregnating.
|
| 3. Remove oxygen sensors from both collectors.
|
| 4. Disconnect a tube of system of recirculation of final gases from a back collector and a head of cylinders.
|
|
|
5. Twist nuts, the fixing exhaust pipes to collectors. |
| 6. Unscrew bolts and remove collectors.
|
| 7. Examine collectors on existence of cracks and other damages.
|
| 8. Carefully clean the joined surfaces of a collector and a head of cylinders. If you found out that laying of a collector proceeded, check whether the collector is deformed, if necessary address the expert.
|
