7.2.4. OBD computer of II system (Powertrain Control Module)
Standard fastening of the PCM module
|
1. Module
2. Facing of a sidewall 3. Powder facing |
4. Socket 5. Lower cover 6. Lower panel |
Removal
| PERFORMANCE ORDER | ||||
|
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engines
- 4. Cooling system
- 5. Heating and ventilation
- 6. Fuel system
- 7. Exhaust system
- 7.1. System of production of exhaust gases
- 7.2. Systems of decrease in toxicity of exhaust gases
- 7.2.1. Introduction
- 7.2.2. Technical characteristics
- 7.2.3. OBD II system
- 7.2.4. OBD computer of II system (Powertrain Control Module)
- 7.2.5. Sensor of turn of a butterfly valve
- 7.2.6. The sensor of absolute pressure in the soaking-up collector
- 7.2.7. Sensor of a mass consumption of air
- 7.2.8. The sensor of temperature of the soaked-up air (IAT sensor)
- 7.2.9. Sensor of temperature of cooling liquid (ECT sensor)
- 7.2.10. Sensor of rotation of the crankshaft
- 7.2.11. Sensor of rotation of a cam-shaft
- 7.2.12. Contact sensor of pressure of the hydraulic booster
- 7.2.13. The sensor of content of oxygen in the fulfilled gases
- 7.2.14. Detonation sensor
- 7.2.15. Car speed sensor
- 7.2.16. Perepuskna air valve of idling (IAC valve)
- 7.2.17. System of the choice of the channel of absorption (ACIS system)
- 7.2.18. System of ventilation of a case
- 7.2.19. System of recirculation
- 7.2.20. System of catching of vapors of gasoline
- 7.2.21. Converter
- 7.2.22. Rub in one - or how to save the catalyst
- 8. Transmission
- 9. Running gear
- 10. Brake system
- 11. Body
- 12. Electric equipment
Standard fastening of the PCM module
Removal