Toyota:: Camry XV20:: Sensor of a mass consumption of air

7.2.7. Sensor of a mass consumption of air

V6 ENGINES

Sensor of a mass rakhod of air

1. Sensor
2. Socket

3. Laying

The sensor of termoanemometricheskiya, is mounted on an air duct.

Check

PERFORMANCE ORDER

	1. Disconnect the socket and at the included ignition check presence of tension from the battery on a conclusion 4. If there is no tension, then check a chain from the main relay of injection to the sensor.
2. Attach the socket and on the working engine check presence of tension between conclusions 1 and 3, having connected voltmeter probes to a back part of conclusions. Tension owes from 1,0 to 1,5 Century. At reduction or increase in turns of the engine tension on these conclusions has to fluctuate.
3. If tension does not correspond specified, then check integrity of wires of the sensor.
4. Before replacement of the sensor check it in car service.

Replacement

PERFORMANCE ORDER

1. Switch off ignition.

2. Disconnect the socket.

3. Remove the air filter.

4. Turn off 2 bolts and remove the sensor.