e4035ede

8.2.5. Gear shifting lever rope

Adjustment
PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Remove the protective guards closing space a boundary a forward part of the car and the lower cross-piece.
3. Weaken a nut of the switching lever on the transmission (it is specified by an arrow).
4. Install the switching lever in parking situation (against the stop up), and then on two clicks down in neutral situation (4-cylinder models, the A140E transmission).
5. Install the switching lever in parking situation (against the stop down), and then on two clicks up (6-cylinder models, the A541E transmission).
6. Install the gear shifting lever in salon in neutral situation.
7. Tighten a lock nut.
8. Check how the lever of switching and the transmission functions.

Replacement

PERFORMANCE ORDER
1. Disconnect a rope from the switching lever on the transmission (the nut is specified by an arrow).
2. Remove the big clamp of a rope (is specified by an arrow) located over the lever. Disconnect a rope from an arm.
3. Unscrew the rope clamp bolts (are specified by shooters) located on a dividing partition.
4. Remove the central panel.
5. Remove a big clamp of a rope.
6. Remove a wire clamp, beat out a lock pin (it is specified by an arrow) and disconnect a rope from the gear shifting lever.
7. Remove a rope.
8. Installation is carried out upside-down removals.