8.2.9. Replacement of epiploons
LEADING HALF SHAFTS
| PERFORMANCE ORDER |
| 1. Remove half shafts. |
|
2. Take old epiploons by means of mount or the special tool. |
|
3. Establish new epiploons. |
|
THE CONDENSING RING OF THE CONDUCTED SPEEDOMETER MECHANISM
The sensor of speed of the car and casing of the conducted mechanism of a speedometer are located in a back part of the transmission.
| PERFORMANCE ORDER |
|
1. Disconnect a wire from the speed sensor, unscrew fixing bolts (are specified by shooters), remove the sensor and the conducted mechanism. |
|
2. Remove the condensing ring. |
| 3. Establish a new ring and install the mechanism and the sensor on the places. |
|
THE CONDENSING RING OF THE SENSOR OF SPEED OF STSEPLNIYA (6-CYLINDER ENGINES)
The sensor of speed of coupling is located on a transmission casing.
| PERFORMANCE ORDER |
| 1. Disconnect a wire from the sensor and remove the sensor. |
| 2. Remove the old condensing ring, establish a new ring and install the sensor into place. |
|
