Joyce Marter mental health speaker
e4035ede

1.1.11.2. Back seat


Folding of back sitting

 Pull the lever of 1 fixing of a seatback in provisions of removal of fixing up.

Pull the button 2 removals of fixing up.

Put a seatback.

Each back can separately develop. It will allow to increase the luggage compartment to backs of front seats.
Prevention

At return of a seatback to vertical position be convinced that seat belts are not overwound and are not jammed under a seatback, and are in their proper position and are ready to use; be convinced of reliability of fixing of a seatback, having pressed forward and back its top part.

When folding is the left seatback down if the baggage in the increased luggage carrier can damage a crossing point of a seat belt of a back central seat, disconnect this belt for prevention of its damage.

Prevention of damage of a crossing point of a seat belt of a back central seat

Press the button of separation of a buckle (light gray) for release of a pad 1 (with the bent end) and give the chance to a belt to be involved.
Prevention

Disconnect a seat belt of a back central seat only in case of the circumstances stated above; do not disconnect it in any other cases.

 Take off a belt from the directing crossing point.


Give the chance to a belt completely to be involved and implant a pad into a crack.

After return of a seatback to vertical position you watch correctly to connect a seat belt of the central seat for readiness for use.

 a) pass a seat belt of a back central seat through a seat belt guide;
b) implant a pad 1 (with the concave end) into a buckle with the light gray button of separation of a buckle.
You will hear click when the pad is latched in a buckle.
Prevention

Do not implant a pad 1 (with the concave end) into other buckle, except that on which there is a light gray button of separation of a buckle. After an insert of a pad be convinced that it was latched in a buckle.

Do not insert coins, paper clips, etc. into a buckle as it can prevent a pad zashchelkivaniye in a buckle.

Make sure that the belt is not overwound and is not clamped under a seat that it is in proper position and is ready to use.

If the seat belt does not function normally, immediately address the dealer of Toyota. Do not use a seat until the seat belt is repaired.