e4035ede

10.8. Wheel cylinder of brakes

Prevention

Cylinders change only in couple on an axis.

Removal

PERFORMANCE ORDER
1. Lift a back part of the car.
2. Remove blocks (see subsection 10.4. and subsection 10.7.).
3. Clear the wheel cylinder.
4. Unscrew the hydraulic actuator union. Shooters specified bolts of fastening of the wheel cylinder.
5. Turn off bolts of fastening of the cylinder.
6. Remove the cylinder and muffle a tube.

Installation
PERFORMANCE ORDER
1. Install the cylinder, wrap bolts by hand. Wrap the union and tighten fastening bolts.
2. Tighten the union and establish blocks and a drum.
3. Remove air from a hydraulic actuator.
4. Establish a wheel, lower the car and check work of brakes.