10.2. Technical characteristics
| Brand of brake fluid |
See subsection 2.1.
|
| Adjusting these pedals of a brake |
See subsection 2.1.
|
| Gap between a rod of the vacuum amplifier and the piston of the main cylinder of a brake |
0 mm
|
| Adjustment of the switch of a signal of braking (the size A for a switch plunger) |
0,8 – 2,4 mm
|
| Disk brakes | |
| Extreme thickness of blocks | |
| – forward brakes | |
| • standard |
2,8 mm
|
| • limit * |
2,6 mm
|
| – back brakes (on models with back disk brakes), the Camry and Camry Solara models | |
| • standard |
0,89 mm
|
| • limit * |
0,80 mm
|
| Brake disk beating | |
| – forward brakes |
0,05 mm
|
| – back brakes |
0,15 mm
|
| • extreme thickness of blocks of the parking brake |
0,8 mm
|
| Drum brakes | |
| Extreme thickness of blocks |
1,6 mm
|
| – internal diameter of a drum | |
| • standard |
228,6 mm
|
| • limit * |
230,6 mm
|
Remark. If on a disk or a drum the values differing from specified in the table are cast, then be guided by the values specified on a disk or a drum.
Moments of an inhaling, Nanometer
| Bolt of fastening of a support to an arm | |
| Forward brakes |
30
|
| Back brakes |
16,8
|
| Bolts of fastening of an arm of a support of a brake | |
| Forward brakes |
95
|
| Back brakes |
41
|
| Bolt of fastening of the union of a hose of a brake to a support |
27
|
| Bolt of fastening of the wheel cylinder of a brake |
8,4
|
| Nut of fastening of the main cylinder of a brake to the vacuum amplifier |
10,8
|
| Nut of fastening of a wheel |
See subsection 2.1.
|