3.4.10. Generator
Installation of the generator on 4-cylinder engines
|
1. Adjusting bolt
2. Wire
3. Socket
|
4. Generator
5. Belt
6. Axial bolt |
Installation of the generator on the V6 engine
|
1. Washer
2. Wire
3. Socket
4. Adjusting bolt
|
5. Generator
6. Belt
7. Lock bolt
8. Axial bolt |
Removal
| PERFORMANCE ORDER |
| 1. Disconnect the battery from weight. |
| 2. Disconnect from the wire generator. |
|
3. Weaken axial (And), lock (In) and adjusting (C) bolts of the generator and take off a belt. |
| 4. Turn out adjusting and axial bolts and remove the generator. |
| 5. If you decided to replace the generator, then it must be kept in mind that the new generator has to correspond to accuracy to replaced. Upon purchase track that number on the case of the new unit corresponded to number replaced, and the arrangement of conclusions on both units coincided. |
|
Installation
The generator is installed upside-down.
