12.1.22. Side mirrors with the electric drive
The mirror drive in the majority of models is carried out from 2 electric motors of vertical and horizontal shift.
| PERFORMANCE ORDER |
| 1. Include ignition (not to start the engine) and lower side glasses. The selector which is built in in the switch include the necessary mirror and check operation of the drive of the right and left mirrors, displacing them to the right and to the left, up and down.
|
| 2. Listen to operation of electric motors.
|
| 3. If operation of electric motors is listened, and the mirror does not move, then the drive mechanism in a mirror is faulty. Remove a mirror and sort.
|
| 4. If operation of electric motors is not listened and mirrors do not move, then check a safety lock.
|
| 5. If the safety lock is serviceable, then get the switch and check short circuit of its contacts.
|
| 6. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crossing point this wire on weight. If the mirror works normally with a crossing point, then repair "regular" connection with weight.
|
| 7. If the mirror does not work, then sort a mirror and check presence of tension on wires. Include ignition and transfer the switch to all provisions, checking tension. On one of wires from the switch tension has to be in each its family way (except for situation Off).
|
| 8. If tension is absent, then check a chain from a mirror to the switch.
|
| 9. If tension is, then remove a mirror and check its work, having executed connection through crossing points. If the mirror does not work, then replace it.
|
|
