12.1.8. A combination of switches on a steering column
Designation of conclusions of the multicontact switch of a steering column and the chart for check
|
|
| Position of the switch
|
Conclusions between which there has to be a chain
|
| The switch of light of headlights – OFF |
No
|
| The switch of light of headlights – back lamps |
14 and 16
|
| The switch of light of headlights – ON |
13, 14 and 16
|
| Passing beam |
16 and 17
|
| Driving beam |
7 and 16
|
| Alarm system |
7, 8 and 16
|
| Left turn |
1 and 2
|
| Neutral position of the switch of turns |
No
|
|
Designations of conclusions of the multicontact switch of screen wiper / windscreen washer
|
|
| Position of the switch
|
Conclusions between which there has to be a chain
|
| Off |
7 i16
|
| Int |
7 and 16
|
| Lo |
7 and 17
|
| Hi |
8 and 17
|
| Switch of a washer, ON |
2 and 11
|
|
Check
Prevention
Disconnect a safety cushion.
| PERFORMANCE ORDER |
| 1. On a column 2 switches are provided. At the left there is a switch of a signal of turn / light of headlights, and the switch of screen wiper / windscreen washer is mounted on the right. |
| 2. Find, having tracked on wires, sockets of a combination of switches on a steering column and disconnect them from the main plaits. |
| 3. An ohmmeter or a control lamp check existence of a chain between the specified conclusions, in different provisions of the switch. Replace the switch if results at least with one of checks negative. |
|
Replacement
| PERFORMANCE ORDER |
| 1. Disconnect the battery from weight. |
| 2. Remove a wheel. |
| 3. Remove both casings of a steering column. |
| 4. Disconnect sockets of switches of a steering column. |
|
5. Unscrew fastening screws (are specified by shooters) and remove a combination of switches. |
| 6. Remove the necessary switch and replace. For this purpose unscrew screws or get latches. |
| 7. Assembly is carried out upside-down. |
|
