e4035ede

9.1.11. Rack of a back suspension bracket

Removal

PERFORMANCE ORDER
1. Remove a back seat and facing of a ware tray.
2. Lift a back part of the car and establish on supports. Remove a wheel.
3. On the cars equipped with ABS system remove a flexible hose and the sensor of speed from the shock-absorber.
4. Disconnect a brake hose from a rack. On the cars equipped with ABS system disconnect wires from the wheel sensor of speed.
5. Disconnect draft of the stabilizer from a rack.
6. Substitute a jack under an arm of a back axis.
7. Release nuts of bolts of fastening of a rack to an arm of a suspension bracket (arrow) and beat out bolts. Bolts can be beaten out only after removal of nuts and a poddomkrachivaniye of an arm of a suspension bracket. Keep in mind that it is resistant quite heavy and work should be performed together, the assistant has to support a rack if necessary.
8. Turn off three nuts of the top fastening of a rack to a body.
9. Lower a jack an arm of a suspension bracket and remove two bolts of fastening of a rack to an arm.
10. Remove a rack.

Check

PERFORMANCE ORDER
Perform procedures from section 3. In need of dismantling for the purpose of replacement of a spring or a rack, perform procedures from section 4.

Installation

PERFORMANCE ORDER
1. Working together, establish a rack in a wheel niche so that hairpins of the top fastening entered openings and screw nuts.
2. Bring an arm to a rack flange, insert bolts and screw nuts. Tighten nuts with the set moment.
3. Attach thirst of the stabilizer for a rack arm.
4. Attach a brake hose to a rack. On the cars equipped with ABS system attach wires to the speed sensor.
5. Establish a wheel and lower the car.
6. Tighten three nuts of the top fastening of a rack with the set moment.
7. Establish a back seat and facing of a ware tray.