e4035ede

9.1.6. Suspension bracket lever

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and remove a wheel from that party with which the suspension bracket lever will be dismantled.
2. Disconnect draft of the stabilizer from the lever (see subsection 9.1.3.).
3. Turn off specified a bolt and nuts of fastening of a spherical support to the lever.
4. Working with mount, take away the suspension bracket lever from a rotary fist.
5. Turn off two bolts of fastening of a forward part of the lever of a suspension bracket to a frame of the engine (arrow).
6. Turn off a bolt and a nut of fastening of a back part of the lever of a suspension bracket to a frame of the engine (arrow).
7. Remove the lever.

Check

PERFORMANCE ORDER
1. Check existence on the lever of deformations. At detection of curvature replace the lever. Rikhtovka of the lever is forbidden.
2. Check a condition of plugs of the lever. At detection on plugs of cracks, gaps and traces of strong wear assembled replace the lever.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down. Tighten all threaded connections with the set moments.
2. Establish a wheel and lower the car.
3. Check and if necessary adjust the angles of installation of wheels.