| 1. Lift a forward part of the car and establish on supports. Remove forward wheels. |
| 2. Remove the panel of protection of a wing which fastens three bolts.
|
| 3. Disconnect steering drafts from the left and right rotary fists (see subsection 9.2.3.). |
|
4. Disconnect drafts of the stabilizer from a bar, having turned off nuts (arrow). At a provorachivaniye of a hairpin record it a six-sided key. At removal of the lever turn off the lower nut. |
|
5. Turn off bolts of fastening of collars of plugs of the stabilizer to an engine frame. |
| 6. Remove forward section of an exhaust pipe. |
| 7. Turn off bolts of fastening of the steering mechanism (see subsection 9.2.5.). |
| 8. Remove the steering mechanism and get a stabilizer bar from the left wheel. |
|
|
9. Remove rubber plugs and check their state. If on plugs damages are found, then replace plugs. Check a condition of hinges of drafts of the stabilizer for what shake 5–6 times the spherical hinge here and there. Then screw a nut and turn it a dynamometer key (with a scale in several N. of m) on 1 turn, doing a turn during 2–4 sec. At commission of the 5th turn read the instrument of a dynamometer of a key which has to be ranging from 0,04 to 0,87 N. m. Otherwise replace draft of the stabilizer. |
| 10. Clear the place of a prileganiye of plugs on a bar of dirt and a rust. |
